A Guide to Seal Coating Your Driveway from Ace Hardware in Oakland, CA
Summer’s here and it’s time to seal coat that driveway. Seal coating fills in minor cracks and protects it from further damage caused by the weather and/or chemicals that may come in contact with its surface. Here’s how Ace Hardware in Oakland, CA recommends you seal coat your driveway every other year.
Step 1. Clean the Driveway
The surface of your driveway should be as clean as possible. Remove any vegetation growing in cracks and use an approved driveway detergent and water to clean away dirt, debris, and grime. Allow the surface to dry completely before continuing.
Step 2. Fill Cracks
Using a filler designed for the task, fill in small cracks and use a putty knife to smooth them flat. Allow the filler to cure according to the directions on the package.
Step 3. Oakland, CA Hardware Store
Recommends Mixing the Sealant Well
Whether you choose a gel or non-gel sealant, it will need some mixing before use. Oakland, CA hardware store owners agree that a paint-stirring attachment on a drill works well for this. Remember to turn the pail upside down for 24 hours before you open it.
Step 4. Apply the First Coat
Spread a thin line of the sealant across the driveway’s surface. Using a squeegee, zig-zag across the width of the driveway pulling the sealer to the edges. Overlap the product for an even application.
Step 5. Apply the Second Coat
After allowing the sealant to dry according to the directions on the product, apply a second coat. Work up and down the length of your driveway in even strokes.
Step 6. Let It Dry
Most driveway sealants need a good 24-48 hours of drying time before anyone drives on it. Place a barricade at the end of your driveway to deter vehicle traffic and check for dryness before allowing full access again.
Asphalt driveways require regular seal coating. Ace Hardware in Oakland, CA recommends you do this every other year to keep your driveway in tip-top shape. Follow the steps above to easily seal coat your driveway.
Comments
Post a Comment